Pin on La Sirenita Carbon Fiber Nylon Filament 1.75mm 10kg. Carbon Fiber ABS, PETG, PC PBT, and Nylon Proprietary Carbon Fiber fill on all Resins Added stiffness Improved dimensional stability Excellent surface finish Recommended Print Settings: CF PC PBT: Extruder: 250 260C. (Better layer bonding at higher temperatures) Bed: 90 100C Hardened Nozzle: 0. 4mm or larger (. 6mm recommended) Layer Height: Ideal layer height is 50 60% of nozzle diameter CF ABS: Extruder: 230 240C Bed: 110C Hardened Nozzle: 0. 4mm or larger (. 6mm recommended) Layer Height: Ideal layer height is 50 60% of nozzle diameter CF PETG: Extruder: 240 250C Bed: 90C Hardened Nozzle: 0. 4mm or larger (. 6mm recommended) Layer Height: Ideal layer height is 50 60% of nozzle diameter CF Nylon: Extruder: 240 260C. (Better layer bonding at higher temperatures) Bed: 90 100C Hardened Nozzle: 0. 4mm or larger (. 6mm recommended) Layer Height: Ideal layer height is 50 60% of nozzle diameter Drying Nylon will absorb more moisture than other resins when left exposed. Make sure to keep this filament in a dry location between uses. If the filament does get wet, you can dry it out for 2 3 hours at 70 80C **We recommend using our Hardened Steel Nozzles if you are printing Carbon Fiber